Do you want to give your Volvo V60 R-design 2014-2017 a new and fresh appearance? Then an add-on lip is something for you! An add-on lip is an extra spoiler that you attach to your existing bumper to create a sportier and more aggressive look.
Installing an add-on lip is easy to do yourself with a few tools and screws. You can paint it any color you want to match your car.
Order your add-on lip today and have it delivered quickly and smoothly.
Remember to test-fit before painting.
ADD-ON FRONTSPOILER FOR VOLVO S60, V60, 14- R-DESIGN
This is Vparts' own 3-piece add-on front spoiler for Volvo S60, V60, 2014- R-design models. Perfect fit and made of ABS plastic. Easy installation as the side lips are screwed into existing holes from the underside, along with the use of adhesive. Screws and rivets are included for easy mounting.
Here's how you install add-on lips on your Volvo S60/V60 2014-2017!
Step 1
Apply adhesive to the indicated areas on the add-on lips.
Step 2
Remove the two outer screws located beneath the bumper (looks the same on both sides).
Step 3
Install the first part at the outer edge.
Step 4
Screw the screws back underneath and adjust the lips to tape them so that there are no gaps and they stay in place. Wipe away excess glue.
Step 5
Repeat on the other side.
Step 6
Wait for approximately 24 hours until the adhesive has cured, then remove the tape.
Step 7
Drill the small flap to insert the rivet, a 5mm drill works well for the included rivets
Step 8
Secure it with the rivet
Step 9
Apply adhesive to the middle part, then place it in position.
Step 10
Use tape to hold it in place, and then use rivets to secure it at the outer edges towards the side parts.
Step 11
Use the included self-drilling screws to attach the center part.
Step 12
Wipe away excess glue.