How to Apply P5 Ceramic Lacquer Sealant:
Wash and clean the varnish thoroughly. For best durability; polish the paint and clean afterwards with isopropanol. The car should not have any coating previously, that's why we recommend using Pureest S3 before application as it doesn't leave any residue.
Always use plastic gloves.
1. Place an application cloth over the applicator and drip 2-3 drops onto the cloth.
2. Apply to a surface that is a maximum of 1×1 meter. Avoid large surfaces to ensure that the agent does not dry out.
3. Wait 30 to 60 seconds when standing at room temperature of 20-25 degrees (the product must not dry in)
4. Wipe off with a clean microfibre cloth before the agent dries.
5. Go over with a second microfibre cloth just to be sure all the agent is wiped away.
6. When the entire vehicle is treated as above, wait at least 30 minutes before applying any second coat, which is optional.
The product needs to be applied in temperatures between 10 and 25 degrees. Indoors in a garage is suitable. Must never be applied in direct sunlight.
Pure:est P5 hardens after being applied to the paint and should not come into contact with water for the next 12 hours for the curing to work at its best.
The recommendation is not to wash the vehicle for the next 5 days.
The dosing accessory should be removed after using the product and the cap replaced to reseal the product so you can use it again.
opened packaging has a shelf life of 1 year.